 |
|
|
AGL Series Transformers |
|
|
 |
|
Transformers range consists of 30W 45W, 65W, 100W, 150W, 200W & 300W with or without earthing.
Transformers are approved by IEC and/or FAA and comply also to ICAO annex 14.
The transformers are completely waterproof and their encapsulation is made of TPE (thermoplastic elastomer), with excellent electrical and mechanical resistance to oil, kerosene, other aircraft fuel, soil acids and other chemicals typically present on airfields.
|
|
|
|
|
|
|
AGL Series LED Transformers (for LED based lights) |
|
|
|
|
With new developments in LED light fittings that are now fast becoming mainstream in today's AGL systems, LED transformers have been developed to suit these low power requirements.
LED Transformer range consists of 10/15W, 20/25W with or without earthing and are approved by IEC and/or FAA and comply also to ICAO annex 14.
The transformers are completely waterproof and their encapsulation is made of TPE (thermoplastic elastomer), with excellent electrical and mechanical resistance to oil, kerosene, other aircraft fuel, soil acids and other chemicals typically present on airfields.
|
|
|
|
|
|
|
AGL Parallel Circuit Transformers |
|
|
 |
|
Parallel transformers are designed for normal line voltages (for example 230VAC).
The possible connection methods are to use one core cable (KRV-type) or two core cable (KRVS type).
Standard primary voltage is 230Vac, max current rating is 20A and frequency is 50/60Hz.
|
|
|
|
|
|
|
Resin Type Primary Connector Kit |
|
|
 |
|
Resin connectors are small, lightweight and handy that can be installed fast and reliably.
Housing material is elastomer with good weathering properties and excellent resistance against ozone and chemicals.
In addition to this, elastomer has excellent temperature resistance in various outdoor conditions.
Also have been tested according to latest FAA AC150/5345-26 revision.
Current rating: 25 A, Voltage rating: 5000 V, Nominal cross-section: 6 mm2/10mm2
|
|
|
|
|
|
|
Primary Connector Kit |
|
|
 |
|
Primary connector kits are designed to comply with specification FAA AC150/5345- 26.
Complete with plugs and receptacles used with screened or unscreened underground power cables.
The connector kits are designed for easy, quick and reliable installation for most cable types providing watertight connections.
Current rating: 25 A, Voltage rating: 5000 V, Nominal cross-section: 6 mm2/10mm2
|
|
|
|
|
|
|
Secondary Connector Kit |
|
|
 |
|
Secondary connector kits are approved according to specification FAA AC150/5345- 26.
Secondary connector kits are designed for either two core cables or two individual wires, complete with plugs and receptacles (cable connectors).
The connector kits are designed for easy, quick and reliable installation for most cable types providing watertight connection.
Current rating: 20 A, Voltage rating: 600 V, Nominal cross-section:1.5-2.5 mm2/4 -6mm2
|
|
|
|
|
|
|
Cable Accessories |
|
|
 |
|
The range consists of prefabricated primary and secondary leads to suit the different needs of the contractor.
|
|
|
|
