CSW Controllers

Fault monitoring and flash controller unit is a combined photocell, switch-over (master/slave), alarm and flash unit for obstacle lights. Fault monitoring is based on the measuring of the current consumption of the aviation lamp.

Selection of the CSW-unit should be based on the operating voltage and the current consumption of the aviation lamps connected to the unit. The CSW is possible to configure to switch-over (master/slave) mode.

Operating Voltage 24VDC Photo Part no. Description Datasheet CEL-CSW-24-16-F 24Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = no, GPS = no, ingress = IP65 Suitable for medium intensity obstacle lights     CEL-CSW-24-02-GPS 24Vdc, max I = 4 x 0.5A, photocell = yes no. of outputs = 4, flash mode = yes GSM = no, GPS = yes, ingress = IP65 Suitable for low intensity obstacle lights     CEL-CSW-24-16-GPS 24Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = no, GPS = yes, ingress = IP65 Suitable for medium intensity obstacle lights     CEL-CSW-24-02-GSM-GPS 24Vdc, max I = 4 x 0.5A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = yes, ingress = IP65 Suitable for low intensity obstacle lights     CEL-CSW-24-16-GSM 24Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = no, ingress = IP65 Suitable for medium intensity obstacle lights     CEL-CSW-24-02-GSM-GPS 24Vdc, max I = 4 x 0.5A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = yes, ingress = IP65 Suitable for low intensity obstacle lights CEL-CSW-24-16-GSM-GPS 24Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = yes, ingress = IP65 Suitable for medium intensity obstacle lights   Operating Voltage 48VDC Photo Part no. Description Datasheet CEL-CSW-48-02-F 48Vdc, max I = 4 x 0.5A, photocell = yes no. of outputs = 4, flash mode = yes GSM = no, GPS = no, ingress = IP65 Suitable for low intensity obstacle lights     CEL-CSW-48-16-F 48Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = no, GPS = no, ingress = IP65 Suitable for medium intensity obstacle lights     CEL-CSW-48-02-GPS 48Vdc, max I = 4 x 0.5A, photocell = yes no. of outputs = 4, flash mode = yes GSM = no, GPS = yes, ingress = IP65 Suitable for low intensity obstacle lights     CEL-CSW-48-16-GPS 48Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = no, GPS = yes, ingress = IP65 Suitable for medium intensity obstacle lights     CEL-CSW-48-02-GSM 48Vdc, max I = 4 x 0.5A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = no, ingress = IP65 Suitable for low intensity obstacle lights     CEL-CSW-48-16-GSM 48Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = no, ingress = IP65 Suitable for medium intensity obstacle lights CEL-CSW-48-02-GSM-GPS 48Vdc, max I = 4 x 0.5A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = yes, ingress = IP65 Suitable for low intensity obstacle lights CEL-CSW-48-16-GSM-GPS 48Vdc, max I = 4 x 4A, photocell = yes no. of outputs = 4, flash mode = yes GSM = yes, GPS = yes, ingress = IP65 Suitable for medium intensity obstacle lights   Operating Voltage 10-60VDC Photo Part no. Description Datasheet CEL-CSW-DCW-0A5-F 10-60Vdc, max I = 2 x 0.5A, photocell = yes no. of outputs = 2, flash mode = yes GSM = no, GPS = no, ingress = IP65 Suitable for low intensity obstacle lights     CEL-CSW-DCW-02-F 10-60Vdc, max I = 2 x 2A , photocell = yes no. of outputs = 2, flash mode = yes GSM = no, GPS = no, ingress = IP65 Suitable for low intensity obstacle lights     CEL-CSW-DCW-04-F 10-60Vdc, max I = 2 x 4A, photocell = yes no. of outputs = 2, flash mode = yes GSM = no, GPS = no, ingress = IP65 Suitable for medium intensity obstacle lights     CEL-PCE-DCW-F 10-60Vdc, photocell = yes flash mode = no, ingress = IP65 Suitable for CSW controller units     CEL-PCE-DCW-PCFL 10-60Vdc, photocell = yes flash mode = yes, ingress = IP65 Suitable for CSW controller units     CEL-PCFL-DC1-B 12, 24, 48Vdc, photocell = yes flash mode = yes, ingress = IP65 Suitable to control a network of lights